Advanced Lusa Interlocking Clay Tile
A premium quality, precision engineered, light weight clay tile, in keeping with the most popular roof traditions in Europe.
- Category: Clay Tiles
Description
ADVANTAGES (FEATURES & BENEFITS) :
- Superior quality – EN1304 certified with a 35-year warrantee if assembled/installed to correct guidelines
- Precision fit and dimensional exactness - allows for perfect fitting, quick and easy assembly.
- Lightweight roof
- Soluble salt resistant – well suited to coastal areas
- Excellent performance under extreme weather conditions – suitable to areas with big thermal amplitudes.
- Impermeable – Low porosity, 3% to + - 1%
- Economic breakage factor – high flexural strength results in reduction in breakage
AVAILABLE COLOURS
TECHNICAL DATA *Based on Red – size and weight of tiles vary per colour:
| Size of Tile | 445 x 249mm Minimum Pitch: 18ᴼ (Dependant on climatic zone and situation) |
| Maximum Pitch | 41ᴼ (Dependant on climatic zone and situation) |
| Minimum Headlap | 73mm |
| Maximum Batten Centres | 380mm Cover Width: 200mm (nominal at lock mid shuffle position) |
| Covering Capacity | 12 tiles/m² (net) |
| Weight of Tiling | + - 37,2 kg/m² |
| Battens Required: | 2,70 lin.m/m² |
| Batten Size Recommended: | 38 x 38mm for rafters/supports not exceeding 760mm centres 38 x 50mm (batten fixed flat) for rafters/supports not exceeding 900mm centres 38 x 50mm (batten on edge) for rafters/supports not exceeding 1 000mm centres |
Note: Above 760mm the rafter spacing can be increased only with engineer-designed trusses and with 38 x 50mm batten of the correct grade. All structural timber must comply with SANS 1707 and SANS 1783
Tile Nails:
- 4,5mm x 40mm corrosion-resistant nails for tile fixing.
- 6,0mm x 80mm and 6,0mm x 120mm corrosion-resistant nails for fixing of special ceramic accessories such as Over Eave Tiles/Half Tiles etc.
Hanging length: 372mm (nominal)
DOWNLOAD DATA SHEET
Advanced Lusa Interlocking Clay Tile Data Sheet.pdf
